Coring machines

In addition to casting in a lot of openings in structures our customers also makes extensive use of cored holes in their concrete elements.

We have produced hydraulic coring machines since 1989, steadily increasing our offerings and today offers a full line of machines to meet any coring need of a precast element producer.

The Teksam coring machine principle is based on control of both drilling speed and pressure. This principle allows the bits to clean themselves during drilling thereby maximizing the life of the bits and the overall efficiency of the operation. The machines are also equipped with load sensing technology to prevent overload or locking of the bits when encountering steel reinforcements.

By incorporating these features into the fundamental design of the machine, the operator is allowed to leave the machine during drilling and perform other tasks.

HC models:

The Original Teksam Coring Machine

Movements such as drilling height, turntable adjustment, and positioning of the drill tower are manually controlled.

HC standard features

  • Turntable for covering up to 1800 mm(71") OD products
  • Three-step drilling speed
  • Manual speed and drilling pressure control, with load sensing and adjustment technology
  • Manual control of drill station movements
  • Holes up to 500 mm(19")
  • Threaded post for mounting drill bits
  • Maximum standard drilling height from table:1000 mm(39")

HC optional features

  • Pneumatic ejector for cored concrete block
  • Motor sizes for holes up to 1000 mm(39")
  • Quick lock drill bit mounting
  • Extended drilling height (centerline) from table to 1800 mm(71")
  • Hydraulic drive on turntable
  • Hydraulic tower positioning
  • Hydraulic control of drilling height
  • Drilling depth control

HCSP models:

Precision Performance Made Portable!

The latest evolution of the HC line, this station features hydraulic movements of the turntable, drilling height, and drill tower position. The control panel provides a visual display of the drilling height and drilling angle. In the standard configuration, the machine is equipped with a three-step drilling speed. Infinite speed control is available as an option. The entire station is mounted on a self-supporting frame for easy movement in the plant or transportation to other locations.

HCSP standard features

  • Turntable for covering up to 1800 mm(71") OD products
  • Drilling height up to 1800 mm(71") from table
  • Three-step drilling speed with load sensing and adjustment technology
  • Manual speed and drilling pressure control
  • Hydraulic control of all drill station movements including turntable, drilling height, and tower position
  • Control panel readouts for drilling height and drilling angle
  • Motor sizes for holes up to 1000 mm(39")
  • Threaded post for mounting drill bits

HCSP optional features

  • Pneumatic ejector for cored concrete block
  • Motor sizes for holes up to 1500 mm(60")
  • Quick lock drill bit mounting
  • Turntable for covering up to 2500 mm(96") OD products

HCSM models:

Expanded Features, More Flexibility

The HCSM takes the HCSP drilling station one step further by mounting it on a moving platform. This allows for drilling offset holes and drilling in large structures, including noncircular structures such as septic tanks. The design gives the producer greater flexibility in their drilling operations.

Our customers can chose to incorporate a hydraulic turntable into their machine and to tie into a full touch screen automation package. A laser positioning system is used to insure accuracy on the locating and drilling of holes. In this way the operator only needs to feed in the particular details of the holes to be cored and the machine takes over, rotating the turntable to the correct angle, adjusting the drill tower height, and making the core itself.

To make the machine completely user friendly a plug ejector feature and a quick-connect system for drill bit changeover is available. The plug ejector eliminates any problems associated with removing the plug from the bit. The quick connect bit system allows the operator to change bits in a matter of seconds, speeding up production.

HCSM standard features

  • Turntable for covering up to 3000 mm(120") OD products
  • Drilling height up to 1800 mm(71") from table
  • Infinite drilling speed and pressure control with automated sensing and adjustment
  • Hydraulic control of all drill station movements including turntable, drilling height, tower position, and lateral positioning for offset holes
  • Control panel readouts for drilling height and drilling angle
  • Motor sizes for holes up to 1500 mm(60")
  • Threaded post for mounting drill bits

HCSM optional features

  • Pneumatic ejector for cored concrete block
  • Extended drilling height (centerline) from table up to 3500 mm(138")
  • PLC control for full automation
  • Laser line sensor and laser drilling height measurement
  • Wireless remote control
  • Direct data transfer (requires PLC control option)
  • Turntable for covering up to 3500 mm(138") OD products

HDD models:

The Ultimate in Production Efficiency

The HDD is the same as the HCSM but it employs a double turntable. An operator can remove and replace a cored element while another section is being cored. This allows near continuous production possibilities.

HDD standard features

  • Two turntables for covering up to 3500 mm(138") OD products
  • Drilling height up to 1800 mm(71") from table
  • Hydraulic control of drill station movements
  • PLC control for full automation
  • Control panel readouts for drilling height and drilling angle
  • Motor sizes for holes up to 1500 mm(60")
  • Threaded post for mounting drill bits HDD optional features
  • Pneumatic ejector for cored concrete block
  • Extended drilling height (centerline) from table up to 3500 mm(138")
  • Laser line sensor and laser drilling height measurement
  • Quick lock drill bit mounting
  • Wireless remote control
  • Direct data transfer
  • Turntables for covering up to 3500 mm(138") OD products